The best things I’ve 3D printed for DIY projects
Affiliate Disclaimer
This post contains affiliate links, meaning we may get a commission if you make a purchase through one of our links, at no additional cost to you.

I honestly was a bit skeptical about getting a 3D printer and didn’t know what kinds of things I could make beyond the farmers market fidget toy, but I was so wrong so let me tell you the best things I’ve 3D print for DIY projects (so far).
I was determined not to print plastic junk and while there are a lot of just aesthetic little toys and figurines and things to print for fun, there are also so many gadgets and tools and genius storage solutions that I’ve gone completely down a rabbit hole.
3D Print Ideas
Our 3D printing setup
To back up a bit, I have the Bambu P2S printer and all of these designs are ones I found on MakerWorld, which is Bambu’s design site/app. Basically, people make their own designs and upload them for others to use and there are so many thousands of designs.
Before getting into 3D printing, I thought it would be so overwhelming to design what I needed and I didn’t realise there are all these designs ready and available – and free!
(And as an aside, Bambu did sponsor a reel for us over on Instagram, but this post isn’t sponsored, just sharing all the links for projects I’ve printed because I got so many questions over on IG!)
The DIY tools I’ve 3D print
Okay, onto the good bit, the best things I’ve 3D printed for our DIY projects. As I write this, I’m building a custom IKEA closet, so a lot of these are tool and carpentry related but I’m sure my stockpile will expand with each project (which is kind of the fun of it).
IKEA Hinge Template

Maybe my most useful thing so far but so specific! I’m making my own custom IKEA Pax doors and drilling the holes accurately in my brand new doors was stressing me out. So, I had a quick look on MakerWorld and saw someone had made a design for this, genius!
It has little pins that stick into the holes in the PAX to line it up properly, but I found the pins were quite weak and snapped off. The template was still useful though because I just lined the marks up with the holes and drew the hinge hole that way.
Corner Clamp

These are so handy to have when you need to hold two pieces of wood together and line the screw up and hold the drill.
Drill dust catcher

You know how you drill into drywall and there is dust all over your rug or baseboard or entire house afterward? This little thing catches it all so you can throw it out easily and mess-free.
Drill bit holder

Raise your hand if you’ve switched from drill to driver bit in a project then lost the drill bit and been so mad you’ve flailed around the room? Surely not just me, so this one is very handy. It’s made to clip onto the back of a Ryobi drill (and maybe other brands? I’m not sure), and holds the bits in place right there.
Ryobi Tool Mount

Up there with one of my favourite things I’ve 3D printed for DIY projects honestly, because in our garage you have to walk the entire way across it to get to the light switch and being able to mount all the tools in one spot right by the door is a game changer. I don’t need to walk by spider alley to grab the drill I just need quickly.
Caulk cap

Another one to file under ‘wow some people are geniuses’ but someone made a cap that screws right onto your caulk tube when you’re done to stop it from getting clogged. You can also print a nozzle cleaner and even new nozzles.
painting cones

This is one of those things you don’t think you need until you use them and wonder how you haven’t had them before. They go under your painting project to raise it off your work space so there’s no paint dripping under, you can paint right to the edge of your project, and it dries without sticking to the surface underneath.
That’s it so far, but I also made a reel on the things I’ve 3D printed for crafting and sewing so far so if you’re also crafty check that one out, too. I have so many things saved to try next, and if you’re also on the 3D printing journey, ket me know the best thing/s you’ve made! There are so many unique things to 3D print.
P.S. make sure to follow along on Instagram and sign up to our newsletter.





